The Windows Logo Program Newsletter provides up to date information about the Windows Logo Program. Did you get this newsletter from a friend? Subscribe to the Windows Logo Program Newsletter. 
Link Layer Topology Discovery Will Not Be Required CONNECT-0098, which takes effect June 1, 2010, originally would have required that network-enabled devices support Link Layer Topology Discovery (LLTD). In response to partner feedback, we are changing CONNECT-0098 from required to if-implemented. This means that we will not require network-enabled devices to support LLTD, but if a device does implement LLTD, we will require that the implementation conform to the protocol standards. Imaging partners should note that IMAGING-0048 will require CONNECT-0098 only if the device implements LLTD. IMAGING-0048 will still require CONNECT-0099 and CONNECT-0100. CONNECT-0098 will also apply to network media devices, network attached storage, and routers, but only if those devices implement LLTD.
Preview Errata Currently in Effect Preview errata are used to mask failures in new tests or sometimes test cases within tests. If a preview erratum is applied to your test run, you should examine the failures in question. Do not assume that these failures are bugs in the test. The failures are most likely problems with the device under test. These problems must be fixed before the preview erratum expires. Listed below are the preview errata that are currently in effect and their expiration dates. Preview errata that expire June 1, 2010: Errata #: Errata Title - 1152: TCG TPM Integration test case Quote2Basic is Previewed until 1 June 2010
- 1245: GlitchFree WMV HD 720p video playback quality test cases 2 & 3 Preview for 6 months post WLK1.4 release
- 1288: UAA Test: preview filter for Encoded Packet Type validation
- 1343: WLK DVD Spindown, WLK Optical Drive Streaming Mode, WLK CSS Negotiation Region Check, and WLK Aggressive Optical Drive tests are PREVIEW
- 1348: UAA Test: PREVIEW Errata: digital converter channel to HDMI slot mapping failures
- 1766: Preview filter for Input tests - Hot Key test, Scroll test, Winkey test
- 1776: TPM TCG OS Interface Test - Preview Errata - Test should be preview initially for WLK 1.5
- 1812: Preview: VWiFiStress is a preview test for WLK 1.5
- 1851: 1394 Industry Certification Test ID Entry (MANUAL) test is in PREVIEW
- 1859: KS Position Test: PREVIEW ERRATA: KSJACK_DESCRIPTION (AUDIO-0077) not required until 5/31/10
- 1876: Preview Errata: Display Devices Verify Digital Connector
- 1879: RoundTrip test: PREVIEW Errata: KSJACK_DESCRIPTION support is in preview mode
- 1942: Optical Logo test: PREVIEW Errata: Dual Layer Write profile will not be required on 1 June 2009 for Blu-Ray drives of 9.5 mm height and smaller as well as DVD drives 7mm height and smaller
Preview errata that expire June 30, 2010: Errata #: Errata Title - 1299: UAA Test: PREVIEW Errata: Some digital pin widgets incorrectly set Jack Detect Override
- 1391: MTP Compliance test has mandatory requirement waived until June 30, 2010
Preview errata that expire August 09, 2010: Errata #: Errata Title - 1608: NDIS: WLAN: Statistics_ext has been modified for WLK 1.5 some failures should be in PREVIEW mode
- 1609: NDIS: WLAN: SoftAP_WPS_ext is a PREVIEW test
- 1719: LOGO Wireless router WPS preview test errata WCN Wireless Default Configuration (Router Reset)
- 1720: Wireless router WPS preview test errata WCN UPnP Configure And Connect to AP with WPA2PSK AES PassPhrase using PIN over Wireless
Preview errata that expire August 31, 2010: Errata #: Errata Title - 1289: UAA Test: PREVIEW filter for HDMI LPCM CAD verb
- 1338: UAA Test: PREVIEW Errata: This test enforces Low Power DCN requirement that D3 Cold support entails EPSS support
Preview errata that expire September 30, 2010: Errata #: Errata Title - 1198: UAA Test Preview errata: S/PDIF pin "Pin Sense" responses cannot use "Impedance" bits
Preview errata that expire December 1, 2010: Errata #: Errata Title - 125: PCI Compliance test failes when SSID/SSVID registers are writeable
- 1315: PREVIEW: IO Cancellation with Direct IO: This test is preview in WLK 1.4 & 1.5
- 1786: USB Host Controller Tramsfer Speed Test - PREVIEW 1789 USB DRIVER RE-ENUMERATION TEST - PREVIEW
- 1796: Preview filter for the Storage Trim Test
- 1818: DVD Spindown test: A condition in this Preview test results in erroneous failures
- 1963: Sensor tests: PREVIEW Errata: Several Sensor tests new to WLK 1.5 are in preview mode
Preview errata that expire January 31, 2011: Errata #: Errata Title - 1444: WaveTest: PREVIEW Errata: HDMI outputs that don't support 44.1kHz on Windows 7 or under third-party driver
- 1801: Fidelity false failures in Render Power Transition Test
Preview errata that expire June 1, 2011: Errata #: Errata Title - 1949: Preview: KSPROPERTY_JACK_SINK_INFO needs to be supported
- 1799: Bluetooth Device Version Check Test- ExecSecondary test is in PREVIEW
- 1799: Bluetooth Device Version Check Test- ExecPrimary test is in PREVIEW
Preview errata that expire July 1, 2011: Errata # Errata Title - 1466: UAA Test: Preview Filter - Intel Low Power DCN says "EPSS implies KeepAlive, but only after July 1st 2011"
Preview errata that expire December 1, 2011: Errata #: Errata Title - 1797: USB-IF Test Certification ID Check - PREVIEW
Preview errata that expire June 1, 2012: Errata #: Errata Title - 1787: USB Host Controller Compliance - PREVIEW
Errata That Will Expire Before October The following Windows Logo Kit errata will expire before October 1, 2010. Errata that expire June 30, 2010: Errata #: Errata Title - 1299: UAA Test: PREVIEW Errata: Some digital pin widgets incorrectly set Jack Detect Override
- 1390: GetObject errata filter
- 1391: MTP Compliance test has mandatory requirement waived until June 30, 2010
- 1445: ERRATA: MTP Compliance Test - Relax battery level device property for camera devices
- 1448: WMDM_Compliance_InitializeStorage
- 1452: PurchaseFlag is not applicable for abstract audio album
- 1454: drmprotection property can only be set on DRM content even though it is read-write
- 1622: The MTP Compliance Test - GetObjectPropList test 18 and 19 may fail due to incorrect method being used.
- 1651: GetObjectPropList Test5 - verify storage id on devices with multiple storages
- 1662: MtpComplianceTest_GetObjectPropList_Test 18 And 19 Fail Due To Incorrect Test Method Being Used
- 1665: MtpComplianceTest_GetObjectPropValue_Tests 8 And 15 Incorrectly Expect The Same Value Returned For Name That Was Sent As FileName
- 1702: MtpComplianceTest_GetObjectReferences References Are Not Persisted Across Sessions
- 1703: MtpComplianceTest_NokiaErrata
- 1705: WmdmCompliance_Re-InitializeStorage
- 1718: MTP Compliance Test SetObjectPropValue
- 1734: Wpd Compliance Test: Stress test is not required to pass.
Errata that expire July 13, 2010: Errata #: Errata Title - 30: PCIHCT: ASPM Capability Support test runs unconditionally on instead of as "Role-Based Error Reporting Capability
- 31: PCI Compliance test fails Advanced Error Reporting portion of the test with Assertion FB88100C-4655-42AF-87A4-857EDE0DE6D3
- 33: PCI Compliance fails Cardbus Controllers on Assertion 6785AA02-FC90-444C-931D-9D4B120A0ED6
- 35: PCI Hardware Compliance Test fails Device Capabilities register that do not always return
- 36: PCI Hardware Compliance Test fails Device Capabilities register on Assertion 7788AEB9-8CFF-44D0-AA4F-898E05D9AE2A: FAILED
- 38: PCI Compliance fails TYP2_IoBaseUpperHalf (68C54D92-6B38-4063-9B51-F5A4B9558147)
- 61: PCI Compliance: TYP2_IoLimitUpperHalf (B6B64850-679D-4767-A17A-70DACA832CAD)
- 69: PCI Compliance: PWRM_PmData_DataSelect (5A75C8B5-3EBB-4836-8AF2-84A049AF808D)
- 70: PCI Compliance: TYP1_PrimaryDiscardTimer (E06D175E-E56E-489A-96E2-02CA507EFDB9)
- 193: PCI Compliance test fails with advisory non-fatal mask error on PCIe 1.1 devices [52942EDA-0F18-46ED-82BD-91D6AA8BDDBC]
- 204: PCI Compliance test fails Assertion: 9CB9EE90-AF3F-40EC-8278-733F6DA9F Bit 5 in the Uncorrectable Error Severity register in the AERC table must be read-only and always return 1
- 215: PCI Compliance test fails PCI-X devices that do not have MSI or MSI-X capability
- 220: PCI Compliance - Test Header Log register of the Advanced Error Reporting Capability table must be read-only
- 327: PCI Compliance - Endpoint Acceptable Latencies tested according to PCIe 1.1 and not 1.0a
- 344: PCI Compliance - Interrupt Line register of the Header table must be read-writable
- 351: PCI Compliance - Bit 17 (Receiver Overflow Error Severity) in the Uncorrectable Error Severity register (offset Ch) in the Advanced Error Reporting Capability table must be read-only and always return 1
- 352: PCI Compliance - Bit 2 (Reserved_1) in the Link Control register (offset 10h) in the PCI Express Capability table must be read-only and always return 0
- 354: PCI Compliance - Bit 20 (Data Link Layer Link Active Reporting Capable) in the Link Capabilities register (offset Ch) in the PCI Express Capability table must be read-only.
- 355: PCI Compliance Message Upper Address register of the MSI Capability table must be read-writable for 64 bit address capable devices
- 356: PCI Compliance - Bit range 11:10 (ASPM Support)in the Link Capabilities register (offset Ch) in the PCI Express Capability table must be read-only
- 385: PCI Compliance - Header Log (1st DW) register of the Advanced Error Reporting Capability table must be read-only. Assertion: 6D047608-9AB2-4A28-AD3F-C60DFA7F4AD0
- 395: PCI Compliance - Class Code register of the Header table must be read-only.
- 396: PCI Compliance - Min_Gnt register of the Header table must be read-only and always return 0.
- 403: PCI Compliance - Bit 0 (Correctable Error Detected) in the Device Status register (offset Ah) in the PCI Express Capability table must be clearable when it is set. Assertion B76FABD4-1C61-46FF-B6D9-155FCBB551EA
- 430: PCI Compliance - Fails Assertion FBABE47C-6E20-4F1B-B7A1-6F073D77F8B2
- 431: PCI Compliance - Fails Assertion D4D19854-F0B7-4952-835A-1270434648EC
- 433: PCI Compliance - Fails Assertion 3AFC2E6D-326C-4A96-AC6B-987D4F809233
- 452: PCI Compliance - Bit 0 (Correctable Error Detected) in the Device Status register (offset Ah) in the PCI Express Capability table must not change value on write of 0
- 472: PCI Compliance - New table Virtual Channel Arbitration Table overlaps existing table Virtual Channel Capability (ID2)
- 488: PCI Compliance - Bit 15 (PME_Status) in the Power Management Control/Status register (offset 4h) in the Power Management Capability table must default to 0 if PME# from D3 cold is not supported.
- 490: PCI Compliance - Bit range 9:4 (Negotiated Link Width)in the Link Status register (offset 12h) in the PCI Express Capability table is 0h. Assertion CF68482E-9EEF-45B4-A8B8-1379AB6CF94A
- 490: Bit range 9:4 (Negotiated Link Width)in the Link Status register (offset 12h) in the PCI Express Capability table is 0h. Assertion CF68482E-9EEF-45B4-A8B8-1379AB6CF94A
- 497: PCI Compliance - Bit range 1:0 (Reserved)in the Message Address register (offset 4h) in the MSI Capability table must be read-only and always return 0. Assertion A99A9B93-292B-457B-8CB6-0855447A8DF3
- 520: PCI Compliance Capabilities Pointer register of the Header table must be read-only
- 521: PCI Compliance Capabilities Pointer register of the Header table cannot have a value of 0h if the Status register indicates otherwise
- 523: PCI Compliance Enhanced Capability Header Register of the Virtual Channel capability (ID2)
- 524: PCI Compliance Bit range 31:28 (Reserved_2)in the Device Capabilities register (offset 4h) in the PCI Express Capability table must be read-only
- 532: PCI Compliance - Bit range 25:18 (Captured Slot Power Limit Value)in the Device Capabilities register (offset 4h) in the PCI Express Capability table must be read-only and always return 0.
- 538: PCI Compliance - New table Port Arbitration Table #0 overlaps existing table Virtual Channel Capability (ID2)
- 576: PCI Compliance - A PCI-X device that generates interrupts must have an MSI or MSI-X capability. Assertion 24078F7D-D376-4557-9A43-4E4DC3AA3E63
- 589: PCI Compliance - Bit range 19:16 (Capability Version)in the Enhanced Capability Header register (offset 0h) in the XYZ Capability table must be read-only
- 590: PCI Compliance - Interrupt Pin register of the Header table must be read-only. Assertion 28AAA17F-22EB-4CB5-BD9F-28FDCE48088D
- 605: PCI Compliance - Trying to write a value=0x** that can't fit in bit range=Port Arbitration Select (bit count=3)
- 658: Bit 8 (Slot Implemented) in the PCI Express Capabilities register (offset 2h) in the PCI Express Capability table must be read-only
- 659: Bit 6 (Presence Detect State) in the Slot Status register (offset 1Ah) in the PCI Express Capability table must be read-only and always return 1 for switch downstream ports and root ports which do not implement a slot
- 680: PCI Compliance - Bit 0 (Load VC Arbitration Table) in the Port VC Control register (offset Ch) in the Virtual Channel Capability (ID2) table must be read-only and always return 0 even though it is technically read-write.
- 681: PCI Compliance - Bit 16 (Load Port Arbitration Table) in the VC Resource Control #0 register (offset 14h) in the Virtual Channel Capability (ID2) table must be read-only and always return 0 for switch ports, root ports and RCRB, even though it is technically read-write.
- 729: PCI Compliance - Unexpected Header Type = 255
- 739: PCI Compliance - Bit range 14:12 (Max_Read_Request_Size)in the Device Control register (offset 8h) in the PCI Express Capability table must be read-writable if implemented.
- 755: PCI Compliance Bit range 6:10 of the Slot Control register of the PCI Express capability is not correctly tested
- 832: PCI Compliance - Operating mode bits of the class code register are not being tested properly
- 833: PCI Compliance - Error Reporting Capable bits 4:0 of the Device Control Register in the PCI Express capability aren't tested correctly
- 875: PCI Compliance - Slot Power Limit Value and Slot Power Limit Scale fields of the Slot Capabilities register shouldn't be tested
- 934: PCI Compliance - Bit range 3:0 (Capability Version)in the PCI Express Capabilities register (offset 2h) in the PCI Express Capability table must be read-only . (Assertion B8334971-DD44-42C4-9DCB-0F58E512D0DF)
- 960: PCI Compliance - Uncorrectable Error Mask and Severity Registers of the AERC are not being tested correctly. 3CDD17AF_FF8BC1A1_461CA4DE
- 1167: PCIHCT - Bit range 23:21 (Reserved)in the Link Capabilities register (offset Ch) in the PCI Express Capability table must be read-only and always return 0
- 1168: PCIHCT - Bit range 15:9 (Reserved_2)in the Link Control register (offset 10h) in the PCI Express Capability table must be read-only and always return 0
- 1169: PCIHCT - Bit 11 (Electromechanical Interlock Control) in the Slot Control register (offset 18h) in the PCI Express Capability table must be read-writable . (Assertion 4976C48A-EAAE-4171-A890-16C1E5810B2D)
- 1171: PCIHCT - Bit range 15:14 (Reserved)in the Link Status register (offset 12h) in the PCI Express Capability table must be read-only and always return 0 . (Assertion 2DF29F4E-C365-4B8D-9A72-0726AD8F53A6)
- 1180: PCI Compliance - Data Link Layer Link Active bit is set but Link Active Reporting Capable is not. Assertion DC62767C-23C3-4668-9745-535E7B351382
- 1221: PCI Compliance incorrectly tests the PCIe to Cardbus bridges. (Assertion 74266472-F9F0-4021-A418-A0DBB694336B)
- 1222: PCI Compliance - Bit 5 (VGA Palette Snoop) in the Command register (offset 4h) in the Header table must be read-only and always return 0 . It was found to be read-writeable. (Assertion CF73318D-AB13-4367-A15A-ABDCEB29E116)
- 1223: PCI Compliance - Bit range 15:0 (Extended Capability ID)in the Enhanced Capability Header register (offset 0h) in the XYZ table must be read-only. (Assertion CBC6377A-5F74-44C6-9A32-053459F2112D0)
- 1594: ERRATA: USB: USB Host Controller Enable Disable Test: Allow more time for devices to re-enumerate after re-enabling all controllers - 2
- 1617: USB Controller Power State Test fails due to controller reset on S4 resume
Errata that expire August 1, 2010: Errata #: Errata Title - 1351: UAA Test false-fails codecs in D3 Cold that don't respond to both halves of double-function-group reset
- 1806: ERRATA: HAL Timer test fails KeStallExecutionProcessor Backoff Test case due to test problem with processor implementation
- 1811: ERRATA: USB Descriptor test incorrectly fails when device returns 'STALL' code
Errata that expire August 9, 2010: Errata #: Errata Title - 192: PCI Compliance - Test does not correctly ID Hot-Pluggable capability - Serial Number not required [60BDF3F8-01D2-4B58-8A14-04DA4C1B694A]
- 235: PCI Compliance Test does not correctly ID Hot-Pluggable capability - Serial Number not required [60BDF3F8-01D2-4B58-8A14-04DA4C1B694A]
- 338: Bit 10 (Interrupt Disable) in the Command register (offset 4h) in the Header table must be read-writable if the device supports an interrupt
- 339: Bit 8 (Extended Tag Field Enable) in the Device Control register (offset 8h) in the PCI Express Capability table must be read-writable if Extended Tag Field Support is indicated
- 340: PCI Compliance - Bit 5 (Retrain Link) in the Link Control register (offset 10h) in the PCI Express Capability table must always return 0 on reads even though it is read-write.
- 343: Bit range 15:8 (Bus Number) in the PCI-X Bridge Status register (offset 4h) in the PCI-X Capability table must be read-only
- 347: PCI Compliance Header Type 1 Registers failure
- 348: PCI Compliance Architecture Power Management Capability failure
- 350: PCI Compliance Bit 3 (Read Completion Boundary) in the Link Control register (offset 10h) in the PCI Express Capability table must be read-only and always return 0 for switch ports
- 365: PCI Compliance - SSVID register of the Subsystem ID and Subsystem Vendor ID Capability table must not change value after power state transitions.
- 387: PCI Compliance - ATI/AMD graphics devices cause a system hang when being tested for power management capabilities.
- 421: PCI Compliance - Function Level Reset initiated by out of specification bit functionality causes assertions to fail
- 463: PCI Compliance - Capability ID register of the Unrecognized Capability ID 19 table is 13h. It must be in the range [0x1 - 0x12]. Assertion C58DF5F1-A565-491A-A776-B804DD494B55
- 566: PCI Compliance - Bit range 1:0 (PowerState)in the Power Management Control/Status register (offset 4h) in the Power Management Capability table is 0h
- 955: Optical Logo test fails Inquiry, Modesense, and Drive serial number test cases on SATA optical drives
- 1087: Composite devices are not properly identified by the Tuner USB Serial Number Test (STREAM-0017)
- 1104: PCIHCT - Bit range 10:9 (DEVSEL# Timing)in the Secondary Status register (offset 1Eh) in the Header table doesn't always return 1 as expected.
- 1147: PCI Compliance - Capabilites pointer register is ovewritten by the test when it is RW and not RO. (Assertion 44D27133-2DA6-4B15-BF03-476FD1BFE0F0)
- 1299: UAA Test: Some digital pin widgets incorrectly set Jack Detect Override
- 1337: ERRATA: Optical test "command perfomance check" cannot be passed by most partners and is blocking logo
- 1528: ERRATA: WHEA: The ERST vallidation test fails due to a valid NOOP instruction that has no physical address
- 1608: NDIS: WLAN: Statistics_ext has been modified for WLK 1.5 some failures should be in PREVIEW mode
- 1609: NDIS: WLAN: SoftAP_WPS_ext is a PREVIEW test
- 1719: LOGO Wireless router WPS preview test errata WCN Wireless Default Configuration (Router Reset)
- 1720: Wireless router preview test errata WCN UPnP Configure And Connect to AP with WPA2PSK AES PassPhrase using PIN over Wireless
- 1727: WHEA HCT Logo: Incorrect instruction check while validating WHEA ERST ACPI Table
- 1751: NDIS: WLAN: AdhocInterop_ext - Client fails to connect to IBSS due to multiple IBSS
- 1754: NDIS: WWAN: CDMA Provider failure, ProviderId must be 0 or 5 digits in length for CDMA
- 1755: NDS: WWAN: CDMA signal test failure.
- 1759: NDIS: WLAN: Scan failure when joining an IBSS in AdhocInterop_ext
- 1761: NDIS WLAN: Softap_WPS_Ext test has issues around capture packets and setting PHY
- 1762: NDIS WLAN: vwifiinfrasoftap_ext - DUT-AP sent unsecure traffic when it is supposed to send only secure traffic
- 1763: NDIS: WLAN: Statistics_ext test has issues on validating broadcast counters - ReceivededFrameCount
- 1763: NDIS: WLAN: Statistics_ext test has issues on validating broadcast counters - ullTransmittedFrameCount
- 1763: NDIS: WLAN: Statistics_ext test has issues on validating broadcast counters - ullWEPExcludedCount
- 1763: NDIS: WLAN: Statistics_ext test fails with DUT failed to receive expected number of packets. Acutal=0, Expected=45 error
- 1763: NDIS: WLAN: Statistics_ext ullReceivedFrameCount test fails with DUT failed to receive expected number of packets. Acutal=0, Expected=45 error
- 1763: NDIS: WLAN: Statistics_ext MacMcastCounters DecryptSuccessCount test fails with ullReceivedFrameCount field in DOT11_STATISTICS/MacMcastCounters after data transmission completes is incorrect. Actual=0, Expected=50
- 1907: Optical Logo test fails AudioMediaDAO with Failed to do raw reading on audio tracks Error
Errata that expire August 31, 2010: Errata #: Errata Title - 1289: UAA Test: PREVIEW filter for HDMI LPCM CAD verb
- 1338: UAA Test: PREVIEW Errata: This test enforces Low Power DCN requirement that D3 Cold support entails EPSS support
Errata that expire September 30, 2010: Errata #: Errata Title - 1198: UAA Test Preview errata: S/PDIF pin "Pin Sense" responses cannot use "Impedance" bits
- 1620: Device Capabilities - ObjectProperties-Audio - Support for AlbumArtist is not required for audio files
| 
